Showing posts with label Component in Mobile Phone. Show all posts
Showing posts with label Component in Mobile Phone. Show all posts

Monday, June 1, 2009

COMPONENT AND FUCTION FINISH

13. VCO IC (Voltage Control Oscilator)
the function as frequency oscillator/generator that be sent to pass Tx(Tranceiver) and frequency that enter to pass part Rx (Receiver) so that being equal with radiated. beside that, this component also functioned as pulse voltage regulator from RF signal processor.

14. RX/TX 
as enter/out signal

15. LCD 
this component will functioned to display all activities from handphones, as media communication reads and write in handphone. 

16. KEYPAD 
this component functioneds as device input that give data command to cpu then processed and sent to other component related to handphone

17. INFRA RED 
infra red a tool that transfer data or program. But in general infra red used to send and receive data from computer to handphone or conversely. Infra red will work when facilities activate good in handphone and or in computer. But usually when computer that used kind laptop or notebox so this facilities detect of system operation at installation. Actually function infra red this is same as does data cable, only data cable direct linked will into handphone while infra red is not such. this apparatus work by using light infra red distance between handphone one with other may not far apart, must face to face, and doesn't shut a certain. 

18. BLUETOOTH 
this tool is used to transfer data or functioned as mediator between a equipment with other equipment. Facilities bluetooth exist in handphone usually used to send or get data from computer, handphone other, or conversely has also and use this facilities. The bluetooth function in handphone in principle same like infra red. simply procedure from bluetooth use frequency stripe or radiowave, for delivery distance or data acceptance doesn't like infrared, bluetooth has overplus can be used to send and get data concurrently at the time of same. beside that bluetooth has also surplus can be used without having to close to one another between sender equipment with receivers equipment, in general distance can achieve hundreds meter.

19. BATTERY 
the function as electricity current source to give electricity current in mobile phone. battery for handphone there what kind, that is: Nickel-Metal Hydrate (nimh), Lithium-Ion(Lion), and Lithium-Poly-Mer (Lipoly). 
READ MORE - COMPONENT AND FUCTION FINISH

Friday, May 15, 2009

Component in Mobile Phone

Fundamental component in cellular telephone set is grouped to be some part : 
1. Power 
    Power part is component that give voltage in every related component and work on command CPU
2. Signal (rx and tx) 
    Signal part component that regulate signal (in and out) and will send the data to cpu to be       cultivated or processed 
3. Data (operating system) 
     This data part functioneds as operating system that cultivate data and give command to      entire parts found on cellular telephone set 
4. Audio part 
   This part component that cultivates or work for voice vibration process that enter or secretory voice vibration 

Power part 
this power part is divided from several that components in cellular telephone set, that component is among others: 
1. Batteray 
2. Ic power supply 
3. Switch on/ off 
4. CPU 

When handphone in a state off, batteray give current/voltage to handphone, that is to ic PA, ic regulator, ic charging, ic interfaces 

Ic power have function to process and divide current / voltage from batteray then take outside stanby voltage to cpu 

When handphone on, CPU get negative voltage (-) from switch on/off, then cpu command to IC power supply for supplying current/voltage to every part in handphone 

In Charging process, current/voltage from charger enter to R fuse that functioned as fuse/safeguard in the event of overload current into charging IC. 

Current/ Voltage that enter to charging ic will be processed and be taked as output and must as same with batteray voltage. 

In charging ic found charging sense as data formed controlling that ic power supply, the function in the event of not appropriate with performance charging ic, so power ic will decide charging and will send data to CPU IC that charging is fail or not charging. 

Power supply will take output voltage after handphone in on state, except vbb voltage that functioned as stanby voltage.

If damage in power supply IC happen, there will be no stanby voltage / vbb from power supply. 


READ MORE - Component in Mobile Phone